| HOME|PROFILE|PRODUCTS|PROCUREMENT|FORUM|RECRUITMENT|FEEDBACK|CHINESE | |
Hi-temperature paste
|
silver content |
85%±2 |
thickness of sintered film |
10 μ m |
sheet resistance |
= 3 m O / |
color |
brown |
solderability |
well |
adhesion |
> 80N |
sieve number |
200-325 sieve |
drying temperature |
130~ 180℃ |
peak temperature |
650~ 750 ℃ |
2、 BY-0665 rear window glass wiring adopts low resistance:
BY-0665 rear window glass wiring adopts low resistance and high resistance silver paste for domestic autos. The standard is 1200mm in length, 0.6mm in width and 12micron in depth and over 80N in stretch intension. It is for large silk screen printing; printing wiring does not expand and break. After sintered and steeled, the wiring does not expand, halo color or break; the resistance fluctuates little in mixed and long time printing; it performs well with overseas black glaze; power test varies less than 5%.
silver content |
71%±2 |
thickness of sintered film |
6 μ m |
sheet resistance |
12m O / |
color |
brown |
solderability |
well |
adhesion |
> 80N |
sieve number |
200-325 sieve |
drying temperature |
130~ 180 ℃ |
peak temperature |
650~ 750 ℃ |
3 、 BY0865:
BY0865: applicable for ITO transparent heated glass sintered by glass substrate, such as heated glass, refrigerator defroster etc. It has wide sintering process, good ohm touch, simple steel and easy joint etc.
...........................................................................................................................
B 、 vacuum fluorescence display screen :
1、 BY-2070 silver paste for vacuum fluorescence display screen:
BY-2070 silver paste for vacuum fluorescence display screen, good cost ratio and printing, tight line. BY2070: for grade-II and grade-III screen with diameter over 0.15mm . good for printing, manual or machine; no conglutination, leakage in printing, no expansion, shift or break in sinter; with thin film (higher resistance than the same medium), low break percentage, small touch resistance, high finish percentage. Together with BY-2031, low resistance, firm, bright, long life. Together with BY-2031, low resistance, firm, bright, long life, good with fluorescence. Together with BY-9025, good forming, firm, low touch resistance, well match with medium or grid.
2、 BY-2080 vacuum fluorescence display screen silver paste:
BY-2080 vacuum fluorescence display screen silver paste, low resistance, high resolution, good printing, and tight line. BY2080: for grade-III screen with diameter over 0.12mm . it is of printability, both manual and machine; no conglutination, leakage in printing, no expansion, shift or break in sinter; with thin film (higher resistance than the same medium), low break percentage, small touch resistance, high finish percentage. Together with BY-2031, low resistance, firm, bright, long life. Together with BY-2031, low resistance, firm, bright, long life, good with fluorescence. Together with BY-9025, good forming, firm, low touch resistance, match well with medium or grid.
3、 BY-9025 grid paste for vacuum fluorescence display screen:
BY-9025 grid paste for vacuum fluorescence display screen, low resistance, firm.
4、 BY-2031 lead paste for vacuum fluorescence display screen:
BY-2031 lead paste for vacuum fluorescence display screen, low resistance, firm, long life, equivalent with Japanese black lead.
...........................................................................................................................
C、 silver paste :
1、 BY-7075 silver paste for PTC thermal resistor:
BY-7075 silver paste for PTC thermal resistor is applied to produce surface electrode, enjoying good printing and welding performance, strong adhesion, wide sintering range and long-term stability.
mineral content |
70-80% |
sieve number |
200-300 sieve |
peak temperature |
490~ 550℃ |
heat preservation time |
10 min |
adhesion |
> 1Kg |
2、 BY-7080 silver paste for PTC thermal resistor:
BY-7080 silver paste for PTC thermal resistor is applied to produce ohm touch electrode, enjoying good printing and electric & press resistance performance, strong adhesion.
mineral content |
75-85% |
sieve number |
200-300 sieve |
peak temperature |
490~ 550 ℃ |
heat preservation time |
10 min |
3、 BY-7270 silver paste for NTC thermal resistor:
BY-7270 silver paste for NTC thermal resistor is applied to produce surface electrode, enjoying good printing and welding performance, strong adhesion, good current resistance and long-term stability.
mineral content |
65-75% |
sieve number |
200-300 sieve |
peak temperature |
780~ 820 ℃ |
heat preservation time |
10 min |
adhesion |
> 1Kg |
...........................................................................................................................
D、 silver paste :
1、 BY-6070 silver paste for ZnO varistor
BY-6070 silver paste for ZnO varistor is used to produce surface electrode, enjoying good printing and welding performance, good current impulsion durability, strong adhesion and long-term stability.
mineral content |
65-75% |
sieve number |
200-300 sieve |
peak temperature |
500~ 600 ℃ |
heat preservation time |
10 min |
adhesion |
> 2Kg |
...........................................................................................................................
E、 solar battery electrode:
1、 BY-5549 silver paste
BY-5549 silver paste is for monocrystalline silicon solar battery anode grid. It features in good welding, high differentiation rate, and excellent Ohm contact characteristics. (Under construction)
drying temperature |
130~ 180 ? |
sieve number |
250-325 sieve |
peak temperature |
720~ 850 ℃ |
photoelectricity transform percentage |
> 13% |
2、 BY-5598 silver-aluminum paste
BY-5598 silver-aluminum paste is for monocrystalline silicon solar battery cathode grid. It features in good welding and excellent Ohm contact characteristics. (Under construction)
drying temperature |
130~ 180 ℃ |
sieve number |
250-325 ℃ |
peak temperature |
720~ 850 ℃ |
photoelectricity transform percentage |
> 13% |
...........................................................................................................................
F、 sintered silver paste for other materials :
1、 BY-8070 medium temperature electrode paste
BY-8070 medium temperature electrode paste is sintered under 600℃, suitable for alumina and ceramic material. It can endure welding very well and has strong adhesion.
2、 BY-8072 high temperature electrode paste
BY-8072 high temperature electrode paste is sintered under 850℃ , suitable for alumina and ceramic material. It can endure welding very well and has strong adhesion.
